During construction of the bypass in Farchant, where the company Gebr Stort out of Egfling was also involved, an excavator by Hitachi type 280 with a hydraulic hammer Indeco HP 2500 and a Komatsu 180 with Indeco MES 1750 as well as a Case 210 with Indeco HP 2000 were used. The hydraulic hammers Indeco are equipped with an intelligent hydraulic system that is able to automatically adjust the punch and beat frequency to the hardness of the material. By this, the hammers ensure maximum productivity. A specifically developed central lubrication ensures that the movable parts inside the hydraulic hammer are working smoothly and reliably. A double shock system provides for a very small load on the excavator boom, since only a little bit of vibration is transmitted.
In Seefeld more than 20 new and used hydraulic hammers by Indeco are available to customers for carriers from 0.6 to 120 t. Furthermore, 250 plus fitting adapters and quick coupler plates are available. This equipment and technical expertise allow SAT the construction and fabrication of adapter plates in the latest version with hydraulic coupling systems such as the LH Likufix, OilQuick and Coupfix up to special hammer cases, for example for underwater use.